CMD Alarms, Data plates and handy accessories

8g white smoke pellets are encapsulated in a polycarbonate sheath and supplied in a re-sealable plastic tub. Perfect for testing air filters, fume hoods, air balancing and fans. White smoke can also be used for photography, special effects and more...

9g cartridge encapsulated in a polycarbonate plastic sheath. Supplied in a re-sealable plastic pack. Perfect for testing air filters, fume hoods, air balancing and fans. Orange smoke can also be used for photography, special effects and more...

Tub of 100 matches with white smoke used for air flow and spillage testing of gas appliances.   • 20 second burn time • 0.75m³ of dense smoke • Clean to use, no residue • Cool to touch after burning • Packed in...

13g smoke pellets are supplied in a re-sealable cardboard tube. Perfect for testing air filters, fume hoods, air balancing and fans. White smoke can also be used for photography, special effects and more.   • Approx. 18m³ of dense smoke...

Because carbon monoxide is slightly lighter than air and also because it may be found with warm, rising air, detectors should be placed on a wall about 5 feet above the floor. The detector may be placed on the ceiling. Do not place the detector right...

Type a description for this product here...

Gas Clamp Plate is used to seal off the top of the flue stack and provide support for the liner. These plates come in two parts for installation.

Data Plate is used to record The Stove / flue and fitting engineers details upon installation.

The Debris collar is fitted to tidy up the underside of the register plate where the flue-pipe passes through.

Like the traditional nose cone the screw fit nose cone is designed to attach to the end of the flexible flue liner so the flexible liner and be dragged down the flue. As the name suggests the screw fit nose cone screws on to the flex so there is no need...

Nose cones connect to the end of the flexible flue liner and are used to guide the flexible flue liner down the flue. Made from mild steel they are usually taped on to the liner as a temporary measure.

This Galvanised Steel Protection Sleeve is suitable for gas, oil and multi-fuel burning appliances. The sleeve slides inside the flexible liner to prevent crushing of the liner when the clamp is secured. Use in conjunction with top plate and top clamp.

This Fixing Clamp is suitable for gas, oil and multi-fuel burning appliances. The clamp slides down the flexible chimney liner until it rests on the top of the chimney and supports the weight of the liner. Used in conjunction with top plate and...

Galvanised Steel Top Plate is suitable for gas, oil and multi-fuel burning appliances. Use in conjunction with top clamp and protection sleeve. Supports the top clamp at the top of the stack.

Type a description for this product here...

This clever little bracket fits on the flexible flue liner and suspends on the chimney pot. It’s used when you need to back fill the chimney and then fit the cowl afterwards. Features: • Used when back filling; • Galvanised steel; •...