Description
Rytons Floor Ventilator with Mirror Stainless Steel Louvre
• Room ventilator utilising air from a ventilated sub-floor void;
• Mirror stainless steel louvre grille provides a stylish appearance;
• Inverted louvres give a flush finish;
• Co-ordinating screws included.
Size: 267mm (L) x 95mm (H) x 125mm (D).
Composition:
• Louvre grille: Grade 430 stainless steel;
• Sleeve: Polypropylene (contains recycled plastic).
Installation:
• Cut an opening in the floor and insert the sleeve (sleeve can be trimmed with a fine tooth saw to reduce the depth if required). Fasten the louvre to the sleeve through the pre-formed holes using the screws provided. Peel off the protective film;
• Note: When installing in an uncarpeted floor the flange may be trimmed and the louvre ventilator screwed to the floor to maintain as flush a finish as possible;
• Important: In areas where radon gas has been identified as a problem, ventilation shall not be taken from the space below ground floor level (e.g. using a floor vent), or interfere in any way with any remedial measures already in place to prevent radon gas entering the habitable part of the dwelling.