5" Matt Stove Pipe

  Our 5" (125 mm) Matt black vitreous enamelled flue pipe can be purchased in 250 mm, 500 mm and 1000 mm straight lengths. These are normally used for connecting your stove / appliance to your flexible flue liner or Insulated twin wall system...

  Our 5" (125 mm) Matt black vitreous enamelled flue pipe can be purchased in 330 mm, 500 mm and 1000 mm straight lengths. These are normally used for connecting your stove / appliance to your flexible flue liner or Insulated twin...

Our 5" (125 mm) Adjustable length is 225 mm in length and is tapered so that you can insert it into another piece of Stove pipe to get your desired length. If placed close to the stove / appliance this product will allow the stove to be removed for...

Our 5" (125 mm) Male 2 male adapter allows you to connect 2 female ended pieces of stove pipe together.   Dura Stove Pipe is a comprehensive range of matt black vitreous enamelled flue pipe. Manufactured in accordance with ISO9001-2008 using low...

Our 5" -  6"  (125 mm - 150mm) stove pipe adapter is used when the outlet of the stove is 5" (125 mm) and you want to increase the flue size to 6" (150 mm)    Dura Stove Pipe is a comprehensive range of matt black vitreous enamelled...

Our 5" (125 mm) 90 degree Tee is used when you have to change direction of the flue i.e on a rear exit appliance / stove.   Dura Stove Pipe is a comprehensive range of matt black vitreous enamelled flue pipe. Manufactured in accordance with...

Our 5" (125mm) Stove Pipe Elbows are available in 15, 30, 45 or 90 degree angles. These elbows are used to change the direction of the flue.      Dura Stove Pipe is a comprehensive range of matt black vitreous enamelled flue pipe...

Dura Stove Pipe is a comprehensive range of matt black vitreous enamelled flue pipe. Manufactured in accordance with ISO9001-2008 using low carbon steel, 1mm thick. Suitable for oil, gas and Solid Fuels, for domestic heating appliances. Finished products...

Our 5" (125 mm) one piece standard 0 degree trim ring is a decorative collar to finish off the area where the stove pipe goes through a non combustible ceiling or wall at 90 degrees.   Dura Stove Pipe is a comprehensive range of matt black...

Our 5" (125 mm) 2 part split is available in the following angles 0 or 45 degree. The trim ring is a decorative collar to finish off the area where the stove pipe goes through a non combustible ceiling or wall  Can be retro-fitted as it comes in 2...

Our One piece Stove pipe offset is available as standard, with door or as an Adjustable piece. (Please note the adjustable version adapts 125mm down in to the other pipe and is tapered to fit into another straight length of stove pipe and secured...

Our Stove pipe wall brackets are 225mm in length but can be cut down to suit. Dura Stove Pipe is a comprehensive range of matt black vitreous enamelled flue pipe. Manufactured in accordance with ISO9001-2008 using low carbon steel, 1mm thick. Suitable...

Our 5 " (125 mm) Damper unit allows you to control air and draw up the chimney.   Usually used as the starter section off the Stove / appliance.   Dura Stove Pipe is a comprehensive range of matt black vitreous enamelled flue pipe...

Dura Stove Pipe is a comprehensive range of matt black vitreous enamelled flue pipe. Manufactured in accordance with ISO9001-2008 using low carbon steel, 1mm thick. Suitable for oil, gas and Solid Fuels, for domestic heating appliances. Finished products...