CMD Alarms, Data plates and handy accessories

Smoke pellets are used to see if there are any leaks in the flue system without having to light a real fire. For testing air movement ducts such as flues and chimneys.  Each pellet burns for approximately 40 seconds Each pellet releases...

Ideally a Carbon Monoxide Alarm should be installed in every room with a fuel burning appliance. Additional alarms may be installed to provide adequate warning for occupants in other rooms, by placing alarms in rooms in which they spend considerable time...

7 year life carbon monoxide alarm provides an early warning of the presence of CO in your home through alarm and LED display. Carbon monoxide detector providing early warning of the presence of CO in your home through alarm and LED display. An...

Type a description for this product here...

Gas Clamp Plate is used to seal off the top of the flue stack and provide support for the liner. These plates come in two parts for installation.

Data Plate is used to record The Stove / flue and fitting engineers details upon installation.

The Debris collar is fitted to tidy up the underside of the register plate where the flue-pipe passes through.

Like the traditional nose cone the screw fit nose cone is designed to attach to the end of the flexible flue liner so the flexible liner and be dragged down the flue. As the name suggests the screw fit nose cone screws on to the flex so there is no need...

Nose cones connect to the end of the flexible flue liner and are used to guide the flexible flue liner down the flue. Made from mild steel they are usually taped on to the liner as a temporary measure.

This Galvanised Steel Protection Sleeve is suitable for gas, oil and multi-fuel burning appliances. The sleeve slides inside the flexible liner to prevent crushing of the liner when the clamp is secured. Use in conjunction with top plate and top clamp.

This Fixing Clamp is suitable for gas, oil and multi-fuel burning appliances. The clamp slides down the flexible chimney liner until it rests on the top of the chimney and supports the weight of the liner. Used in conjunction with top plate and...

Galvanised Steel Top Plate is suitable for gas, oil and multi-fuel burning appliances. Use in conjunction with top clamp and protection sleeve. Supports the top clamp at the top of the stack.